XC908AS60ACFU Motorola Semiconductor Products, XC908AS60ACFU Datasheet - Page 561

• Manufacturer Part Number: XC908AS60ACFU
• Description: MC68HC908AZ60A, MC68HC908AS60A Hcmos Microcontroller Unit Technical Data
• Manufacturer: Motorola Semiconductor Products

MC68HC908AZ60A — Rev 2.0
MOTOROLA
Timer Interface Module B
Timer Interface Module A
Electrical Specifications
Programmable Interrupt
Keyboard Module
Section affected
Appendix A
(TIMA-6)
(TIMB)
Timer
(KBD)
(PIT)
Corrected numerous type and grammatical errors.
Corrected numerous pin and register name errors within text.
Corrected references to TIMB overflow interrupts (removed "channel x"
Corrected type and grammatical errors.
Corrected PIT Overflow Interrupt Enable Bit acronym from PIE to POIE.
Corrected addresses of KBSCR and KBIER within text.
Corrected numerous type and grammatical errors.
Corrected numerous pin and register name errors within text.
Corrected references to TIMA overflow interrupts (removed "channel x"
Corrected functional description of TOF flag.
Corrected type errors.
Increased V
Corrected formula for Average Junction Temperature in Thermal
Added column for typical V
Decreased LVI trip voltage specification to 3.80V and increased LVI recovery
Increased VHI specification to minimum of V
Added Unit columns to all CGM specification tables and adjusted text
Corrected Operating Voltage specification in CGM Operating Conditions.
Added typical specifications for K
Split Memory Characteristics table into separate RAM Memory
Added maximum specification for EEPROM AUTO bit set for each of program
Corrected NOTES section of FLASH Memory Characteristics.
Added Note 3 to BDLC Transmitter VPW Symbol Timings table.
Added text describing elimination of need for V
Added subsection highlighting change of Monitor Mode entry and COP disable
Added subsection highlighting change in LVI trip and recovery voltage
references as they are incorrect).
references as they are incorrect).
Characteristics.
Characteristics.
voltage to 4.49V in 5.0 Volt DC Electrical Characteristics.
4.5V in 5.0 Volt DC Electrical Characteristics.
accordingly.
Acquisition/Lock Time Information.
Characteristics, EEPROM Memory Characteristics and FLASH Memory
Characteristics tables.
and erase operation in EEPROM Memory Characteristics.
FLASH block protect registers.
voltage change.
specifications.
HI
specification in Maximum Ratings to V
Revision History
Major Changes Between Revision 1.0 and Revision 0.0
DD
Description of change
Supply Current values in 5.0 Volt DC Electrical
acq
and K
trk
DD
parameters in CGM
HI
+ 3.0V and maximum of V
on IRQ pin to program/erase
DD
+ 4.5V.
Revision History
Technical Data
DD
561
+