UPD70F3738GF-GAS-AX Renesas Electronics America, UPD70F3738GF-GAS-AX Datasheet - Page 935

• Manufacturer Part Number: UPD70F3738GF-GAS-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3738GF-GAS-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

31.1.6 Cautions
(1) If a reset signal is input (from the target system or from an internal reset source) during program execution, the
(2) Even if the reset signal is masked by the mask function, the I/O buffer (port pin) may be reset if a reset signal
(3) The reset signal from a pin for which a break is specified is masked and the CPU and peripheral I/O are not
(4) In the on-chip debug mode, the DDO pin is forcibly set to high-level output.
(5) On-chip debugging can be used when the supply voltage (V
(6) In the on-chip debug mode, the output voltage of the regulator does not decrease even in the low-voltage
break function may malfunction.
is input from a pin.
reset. If a pin-based reset or internal reset is generated as soon as the flash memory is rewritten by DMM or
read by the RAM monitor function while the user program is being executed, the CPU and peripheral I/O may
not be correctly reset.
at less than 2.7 V.
STOP mode, low-voltage subclock mode, or low-voltage sub-IDLE mode
CHAPTER 31 ON-CHIP DEBUG FUNCTION
User’s Manual U18953EJ5V0UD
DD
) is in a range of 2.7 to 3.6 V. It cannot be used
933