UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 1243

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(24) UF0 INT clear 3 register (UF0IC3)
Remark
UF0IC3
Bit position
This register controls clearing the interrupt sources indicated by the UF0IS3 register.
This register is write-only, in 8-bit units. If this register is read, the value FFH is read.
FW can clear an interrupt source by writing 0 to the corresponding bit of this register. Even a bit that is
automatically cleared to 0 by hardware can be cleared by FW before it is cleared by hardware. Writing 0 to a
bit of this register automatically sets the bit to 1. Writing 1 is invalid.
The related bits are invalid if each endpoint is not supported by the setting of the UF0EnIM register (n = 2, 4)
and the current setting of the interface.
7, 3
6, 2
5, 1
4, 0
n = 1, 2
BKO2
FLC
7
BKOnFLC
BKOnNLC
BKOnNAKC
BKOnDTC
Bit name
BKO2
NLC
6
CHAPTER 22 USB FUNCTION CONTROLLER (USBF)
NAKC
BKO2
These bits clear the BLKOnFL interrupt.
These bits clear the BLKOnNL interrupt.
These bits clear the BLKOnNK interrupt.
These bits clear the BLKOnDT interrupt.
5
0: Clear
0: Clear
0: Clear
0: Clear
BKO2
DTC
4
User’s Manual U19601EJ2V0UD
BKO1
FLC
3
BKO1
NLC
2
Function
NAKC
BKO1
1
BKO1
DTC
0
00200042H
Address
After reset
FFH
1241