UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 386

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

384
(2) Operation timing in external event count mode
Cautions 1. In the external event count mode, do not set the TABnCCR0 register to 0000H.
(a) Operation if TABnCCR0 register is set to FFFFH
If the TABnCCR0 register is set to FFFFH, the 16-bit counter counts to FFFFH each time the valid edge of
the external event count signal has been detected.
synchronization with the next count-up timing, and the INTTABnCC0 signal is generated. At this time, the
TABnOPT0.TABnOVF bit is not set.
Remark
INTTABnCC0 signal
TABnCCR0 register
2. In the external event count mode, use of the timer output is disabled. If performing timer
output using external event count input, set the interval timer mode, and select the
operation
(TABnCTL1.TABnMD2 to TABnCTL1.TABnMD0 bits = 000, TABnCTL1.TABnEEE bit = 1).
n = 0, 1
16-bit counter
TABnCE bit
FFFFH
0000H
CHAPTER 8 16-BIT TIMER/EVENT COUNTER AB (TAB)
enabled
by
External event
count signal
interval
User’s Manual U19601EJ2V0UD
the
external
External event
count signal
interval
FFFFH
event
The 16-bit counter is cleared to 0000H in
count
External event
count signal
interval
input
for
the
count
clock