UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 249

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Table 7-3. Function of Capture/Compare Register in Each Mode and How to Write Compare Register
Interval timer
External event counter
External trigger pulse output
One-shot pulse output
PWM output
Free-running timer
Pulse width measurement
(a) Function as compare register
(b) Function as capture register
The following table shows the functions of the capture/compare register in each mode, and how to write data to
the compare register.
The TAAnCCR0 register can be rewritten even when the TAAnCTL0.TAAnCE bit = 1.
The set value of the TAAnCCR0 register is transferred to the CCR0 buffer register. When the value of the
16-bit counter matches the value of the CCR0 buffer register, a compare match interrupt request signal
(INTTAAnCC0) is generated. If TOAAn0 pin output is enabled at this time, the output of the TOAAn0 pin is
inverted.
When the TAAnCCR0 register is used as a cycle register in the interval timer mode, external event count
mode, external trigger pulse output mode, one-shot pulse output mode, or PWM output mode, the value of
the 16-bit counter is cleared (0000H) if its count value matches the value of the CCR0 buffer register.
When the TAAnCCR0 register is used as a capture register in the free-running timer mode, the count value
of the 16-bit counter is stored in the TAAnCCR0 register if the valid edge of the capture trigger input pin
(TIAAn0 pin) is detected. In the pulse width measurement mode, the count value of the 16-bit counter is
stored in the TAAnCCR0 register and the 16-bit counter is cleared (0000H) if the valid edge of the capture
trigger input pin (TIAAn0) is detected.
Even if the capture operation and reading the TAAnCCR0 register conflict, the correct value of the
TAAnCCR0 register can be read.
Operation Mode
CHAPTER 7 16-BIT TIMER/EVENT COUNTER AA (TAA)
Compare register
Compare register
Compare register
Compare register
Compare register
Capture/compare register
Capture register
User’s Manual U19601EJ2V0UD
Capture/Compare Register
Anytime write
Anytime write
Batch write
Anytime write
Batch write
Anytime write
How to Write Compare Register
−
247