R5F21346CNFP#U0 Renesas Electronics America, R5F21346CNFP#U0 Datasheet - Page 287

MCU 1KB FLASH 32K ROM 48-LQFP

R5F21346CNFP#U0

Manufacturer Part Number
R5F21346CNFP#U0
Description
MCU 1KB FLASH 32K ROM 48-LQFP
Manufacturer
Renesas Electronics America
Series
R8C/3x/34Cr
Datasheet

Specifications of R5F21346CNFP#U0

Core Processor
R8C
Core Size
16/32-Bit
Speed
20MHz
Connectivity
I²C, LIN, SIO, SSU, UART/USART
Peripherals
POR, PWM, Voltage Detect, WDT
Number Of I /o
43
Program Memory Size
32KB (32K x 8)
Program Memory Type
FLASH
Ram Size
2.5K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 12x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-20°C ~ 85°C
Package / Case
48-LQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
R5F21346CNFP#U0
Manufacturer:
Renesas Electronics America
Quantity:
135
Company:
Part Number:
R5F21346CNFP#U0
Manufacturer:
Renesas Electronics America
Quantity:
10 000
R8C/34C Group
REJ09B0586-0100 Rev.1.00 Jan 13, 2010
Page 254 of 723
19. Timer RC
Timer RC is a 16-bit timer with four I/O pins.
19.1
Table 19.1
Count source is f1, f2, f4, f8, f32, or TRCCLK input (bits TCK2 to TCK0 in
TRCCR1 register are set to a value from 000b to 101b)
Count source is fOCO40M (bits TCK2 to TCK0 in TRCCR1 register are set
to 110b)
Count source is fOCO-F (bits TCK2 to TCK0 in TRCCR1 register are set to
111b)
Timer RC uses either f1, fOCO40M or fOCO-F as its operation clock. Table 19.1 lists the Timer RC Operation
Clock.
Table 19.2 lists the Pin Configuration of Timer RC, and Figure 19.1 shows a Timer RC Block Diagram.
Timer RC has three modes.
• Timer mode
The following two modes use the output compare function.
• PWM mode
• PWM2 mode
Input capture function, output compare function, and PWM mode settings may be specified independently for each
pin.
In PWM2 mode waveforms are output based on a combination of the counter or the register.
- Input capture function
- Output compare function
Overview
Timer RC Operation Clock
The counter value is captured to a register, using an external signal as the trigger.
Matches between the counter and register values are detected. (Pin output state
changes when a match is detected.)
Pulses of a given width are output continuously.
A one-shot waveform or PWM waveform is output following the trigger after the
wait time has elapsed.
Condition
f1
fOCO40M
fOCO-F
Timer RC Operation Clock
19. Timer RC

Related parts for R5F21346CNFP#U0