S1D13705 Epson Electronics America, Inc., S1D13705 Datasheet - Page 137

• Manufacturer Part Number: S1D13705
• Description: S1d13705 Embedded Memory Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
Programming Notes and Examples
Issue Date: 01/02/13
For this example the Horizontal Non-Display register [REG[08h]) needs to be set to 07h
and the Vertical Non-Display register (REG[0Ah]) needs to be set to 03h.
The 16,000,000/2 in the formula above represents the input clock being divided by two
when this alternate portrait mode is selected. With the values given for this example we
must ensure the Input Clock Divide bit (REG[02h] b4) is reset (with the given values it was
likely set as a result of the frame rate calculations for landscape display mode).
No other registers need to be altered.
The display is now configured for portrait mode use. Offset zero of display memory corre-
sponds to the upper left corner of the display. Display memory is accessed exactly as it was
for landscape mode.
As this is the alternate portrait mode the power of two stride issue encountered with the
default portrait mode is no longer an issue. The stride is the same as the portrait mode width.
In this case 120 bytes.
FrameRate
FrameRate
=
=
---------------------------------------------------------------------------------------- -
HDP
-------------------------------------------------------
320
+
16 000 000
----------------------------- -
+
HNDP
88
2
PCLK
240
VDP
+
3
+
=
VNDP
80.69
X27A-G-002-02
S1D13705
Page 45