S1D13705 Epson Electronics America, Inc., S1D13705 Datasheet - Page 425

no-image

S1D13705

Manufacturer Part Number
S1D13705
Description
S1d13705 Embedded Memory Lcd Controller
Manufacturer
Epson Electronics America, Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
S1D1370500A1
Manufacturer:
EPSON/爱普生
Quantity:
20 000
Part Number:
S1D13705F00A100
Manufacturer:
EPSON
Quantity:
1 831
Part Number:
S1D13705F00A200
Manufacturer:
EPSON/爱普生
Quantity:
20 000
Epson Research and Development
Vancouver Design Center
4.3 MCF5307 Chip Select Configuration
Interfacing to the Motorola MCF5307 "ColdFire" Microprocessor
Issue Date: 01/02/13
Chip Selects 0 and 1 have programmable block sizes from 64K bytes through 2G bytes.
However, these chip selects would normally be needed to control system RAM and ROM.
Therefore, one of the IO chip selects CS2 through CS7 is required to address the entire
address space of the S1D13705. These IO chip selects have a fixed, 2M byte block size. In
the example interface, chip select 4 is used to control the S1D13705. The S1D13705 only
uses a 128K byte block with its 80K byte display buffer residing at the start of this 128K
byte block and its internal registers occupying the last 32 bytes of this block. This block of
memory will be shadowed over the entire 2M byte space. The CSBAR register should be
set to the upper 8 bits of the desired base address.
The following options should be selected in the chip select mask registers (CSMR4/5):
• WP = 0 – disable write protect
• AM = 0 - enable alternate bus master access to the S1D13705
• C/I = 1 - disable CPU space access to the S1D13705
• SC = 1 - disable Supervisor Code space access to the S1D13705
• SD = 0 - enable Supervisor Data space access to the S1D13705
• UC = 1 - disable User Code space access to the S1D13705
• UD = 0 - enable User Data space access to the S1D13705
• V = 1 - global enable (“Valid”) for the chip select
The following options should be selected in the chip select control registers (CSCR4/5):
• WS0-3 = 0 - no internal wait state setting
• AA = 0 - no automatic acknowledgment
• PS (1:0) = 1:0 – memory port size is 16 bits
• BEM = 0 – Byte enable/write enable active on writes only
• BSTR = 0 – disable burst reads
• BSTW = 0 – disable burst writes
X27A-G-011-02
S1D13705
Page 15

Related parts for S1D13705