S1D13705 Epson Electronics America, Inc., S1D13705 Datasheet - Page 233

• Manufacturer Part Number: S1D13705
• Description: S1d13705 Embedded Memory Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
13705PWR
S1D13705 Supported Evaluation Platforms
13705PWR Power Save Utility
Issue Date: 01/02/12
The 13705PWR Power Save Utility is a tool to assist in the testing of the software and
hardware power save modes.
Refer to the section titled “Power Save Modes” in the S1D13705 Programming Notes and
Examples manual, document number X26A-G-002-xx, and the S1D13705 Functional
Hardware Specification, document number X26A-A-001-xx for further information.
The 13705PWR utility must be configured and/or compiled to work with your hardware
platform. Consult documentation for the program 13705CFG.EXE which can be used to
configure 13705PWR.
This software is designed to work in both embedded and personal computer (PC) environ-
ments. For the embedded environment, it is assumed that the system has a means of
downloading software from the PC to the target platform. Typically this is done by serial
communications, where the PC uses a terminal program to send control commands and
information to the target processor. Alternatively, the PC can program an EPROM, which
is then placed in the target platform. Some target platforms can also communicate with the
PC via a parallel port connection, or an Ethernet connection.
13705PWR has been designed to work with the following S1D13705 supported evaluation
platforms:
• PC system with an x86 processor. Both 16-bit and 32-bit code is supported.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
If the platform you are using is different from the above, please see the S1D13705
“Programming Notes and Examples” manual, document number X26A-G-002-xx.
M68EC000 processor.
X27A-B-007-02
S1D13705
Page 3