MC9S12G FREESCALE [Freescale Semiconductor, Inc], MC9S12G Datasheet - Page 635

• Manufacturer Part Number: MC9S12G
• Description: Ignores external trigger. Performs one conversion sequence and stops.
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

20.2
The TIM16B8CV3 module has a selected number of external pins. Refer to device specification for exact
number.
20.2.1
This pin serves as input capture or output compare for channel 7 if this channel is available. This can also
be configured as pulse accumulator input.
20.2.2
Those pins serve as input capture or output compare for TIM168CV3 channel if the corresponding channel
is available.
20.3
This section provides a detailed description of all memory and registers.
20.3.1
The memory map for the TIM16B8CV3 module is given below in
register is the address offset. The total address for each register is the sum of the base address for the
TIM16B8CV3 module and the address offset for each register.
Freescale Semiconductor
This document is valid for the S12G96 and the S12G128 device. All information related to other devices is preliminary.
External Signal Description
Memory Map and Register Definition
IOC7 — Input Capture and Output Compare Channel 7
IOC6 - IOC0 — Input Capture and Output Compare Channel 6-0
Module Memory Map
For the description of interrupts see
CHANNEL 7 OUTPUT COMPARE
Figure 20-4. Channel 7 Output Compare/Pulse Accumulator Logic
TIOS7
TEN
PULSE
ACCUMULATOR
OCPD
MC9S12G Family Reference Manual, Rev.1.01
NOTE
Section 20.6,
Figure
“Interrupts”.
20-5. The address listed for each
PAD
Timer Module (TIM16B8CV3)
635