MC9S12G FREESCALE [Freescale Semiconductor, Inc], MC9S12G Datasheet - Page 891

• Manufacturer Part Number: MC9S12G
• Description: Ignores external trigger. Performs one conversion sequence and stops.
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

96 KByte Flash Module (S12FTMRG96K1V1)
25.4.4.2.1
Define FCCOB Contents
The FCCOB parameter fields must be loaded with all required parameters for the Flash command being
executed. Access to the FCCOB parameter fields is controlled via the CCOBIX bits in the FCCOBIX
register (see
Section
25.3.2.3).
The contents of the FCCOB parameter fields are transferred to the Memory Controller when the user clears
the CCIF command completion flag in the FSTAT register (writing 1 clears the CCIF to 0). The CCIF flag
will remain clear until the Flash command has completed. Upon completion, the Memory Controller will
return CCIF to 1 and the FCCOB register will be used to communicate any results. The flow for a generic
command write sequence is shown in
Figure
25-26.
MC9S12G Family Reference Manual, Rev.1.01
Freescale Semiconductor
891
This document is valid for the S12G96 and the S12G128 device. All information related to other devices is preliminary.