UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 253

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

7.5.4
set to 1. When the valid edge of an external trigger input is detected, 16-bit timer/event counter P starts counting, and
outputs a one-shot pulse from the TOPn1 pin.
trigger is used, the TOPn0 pin outputs the active level while the 16-bit counter is counting, and the inactive level when
the counter is stopped (waiting for a trigger).
TIPn0 pin
In the one-shot pulse output mode, 16-bit timer/event counter P waits for a trigger when the TPnCTL0.TPnCE bit is
Instead of the external trigger, a software trigger can also be generated to output the pulse. When the software
One-shot pulse output mode (TPnMD2 to TPnMD0 bits = 011)
Count clock
Remark
selection
Software trigger
generation
TPnCE bit
detector
n = 0 to 5
Edge
Figure 7-20. Configuration in One-Shot Pulse Output Mode
CHAPTER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
Count start
control
Preliminary User’s Manual U18953EJ1V0UD
CCR1 buffer register
CCR0 buffer register
TPnCCR1 register
TPnCCR0 register
16-bit counter
Match signal
Match signal
Clear
Transfer
Transfer
S
R
S
R
controller
controller
(RS-FF)
(RS-FF)
Output
Output
INTTPnCC1 signal
INTTPnCC0 signal
TOPn1 pin
TOPn0 pin
253