UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 648

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

18.13 Cautions
648
(1) Caution for VSWC register
(2) Caution for DMA transfer executed on internal RAM
(3) Caution for reading DCHCn.TCn bit (n = 0 to 3)
When using the DMAC, be sure to set an appropriate value, in accordance with the operating frequency, to the
VSWC register.
When the default value (77H) of the VSWC register is used, or if an inappropriate value is set to the VSWC
register, the operation is not correctly performed (for details of the VSWC register, see 3.4.8 (1) (a) System
wait control register (VSWC)).
When executing the following instructions located in the internal RAM, do not execute a DMA transfer that
transfers data to/from the internal RAM (transfer source/destination), because the CPU may not operate
correctly afterward.
Conversely, when executing a DMA transfer to transfer data to/from the internal RAM (transfer
source/destination), do not execute the above two instructions.
The TCn bit is cleared to 0 when it is read, but it is not automatically cleared even if it is read at a specific
timing. To accurately clear the TCn bit, add the following processing.
(a) When waiting for completion of DMA transfer by polling TCn bit
(b) When reading TCn bit in interrupt servicing routine
• Bit manipulation instruction located in internal RAM (SET1, CLR1, or NOT1)
• Data access instruction to misaligned address located in internal RAM
Confirm that the TCn bit has been set to 1 (after TCn bit = 1 is read), and then read the TCn bit three more
times.
Execute reading the TCn bit three times.
CHAPTER 18 DMA FUNCTION (DMA CONTROLLER)
Preliminary User’s Manual U18953EJ1V0UD