UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 837

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

A.4.3
is shown below.
<1> Host machine
<2> Software
<3> USB interface cable
<4> MINICUBE2
<5> 16-pin target cable
<6> Target connector (sold separately)
Target system
The system configuration when connecting MINICUBE2 to the host machine (PC-9821 series, PC/AT compatible)
Remark The numbers in the angular brackets correspond to the numbers in Figure A-4.
V850ES/JG3-L
On-chip debug emulator
When using MINICUBE2 QB-MINI2
Figure A-4. System Configuration of On-Chip Emulation System
<6>
<5>
APPENDIX A DEVELOPMENT TOOLS
PC with USB ports
The integrated debugger ID850QB, device file, etc.
Download the device file from the NEC Electronics website.
USB cable to connect the host machine and MINICUBE. It is supplied with
MINICUBE. The cable length is approximately 2 m.
This on-chip debug emulator serves to debug hardware and software when
developing application systems using the V850ES/JG3-L. It supports integrated
debugger ID850QB.
Cable to connect MINICUBE2 and the target system.
It is supplied with MINICUBE. The cable length is approximately 15 cm.
Use a 16-pin general-purpose connector with 2.54 mm pitch.
Preliminary User’s Manual U18953EJ1V0UD
http://www.necel.com/micro/ods/eng/
<4>
<3>
<2> Software
<1>
837