UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 745

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

data when transmitting/receiving data consisting of several bytes.
1000B) LSB-first as an example.
Communication errors can easily be detected if the CRC code is transmitted/received along with transmit/receive
The following is an illustration using the transmission of 12345678H (0001 0010 0011 0100 0101 0110 0111
Setting procedure on transmitting side
Setting procedure on receiving side
<1> Write the initial value 0000H to the CRCD register.
<2> Write the 1 byte of data to be transmitted first to the transmit buffer register. (At this time, also write the
<3> When transmitting several bytes of data, write the same data to the CRCIN register each time transmit
<4> After all the data has been transmitted, write the contents of the CRCD register (CRC code) to the
<1> Write the initial value 0000H to the CRCD register.
<2> When reception of the first 1 byte of data is complete, write that receive data to the CRCIN register.
<3> If receiving several bytes of data, write the receive data to the CRCIN register upon every reception
<4> Next, the CRC code is transmitted from the transmitting side, so write this data to the CRCIN register
<5> When reception of all the data, including the CRC code, has been completed, reception was normal if the
same data to the CRCIN register.)
data is written to the transmit buffer register.
transmit buffer register and transmit them. (Since this is LSB first, transmit the data starting from the
lower bytes, then the higher bytes.)
completion. (In the case of normal reception, when all the receive data has been written to the CRCIN
register, the contents of the CRCD register on the receiving side and the contents of the CRCD register
on the transmitting side are the same.)
similarly to receive data.
contents of the CRCD register are 0000H. If the contents of the CRCD register are other than 0000H,
this indicates a communication error, so transmit a resend request to the transmitting side.
78
Figure 25-4. CRC Transmission Example
Transmit/receive data
Preliminary User’s Manual U18953EJ1V0UD
(12345678H)
CHAPTER 25 CRC FUNCTION
56
34
12
F6
CRC code
(08F6H)
08
745