UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 676

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

19.4.2 Restore
PC’s address.
676
Restoration from software exception processing is carried out by the RETI instruction.
By executing the RETI instruction, the CPU carries out the following processing and shifts control to the restored
<1> Loads the restored PC and PSW from EIPC and EIPSW because the PSW.EP bit is 1.
<2> Transfers control to the address of the restored PC and PSW.
The processing of the RETI instruction is shown below.
Caution When the EP and NP bits are changed by the LDSR instruction during the software exception
Remark
processing, in order to restore the PC and PSW correctly during recovery by the RETI
instruction, it is necessary to set the EP bit back to 1 and the NP bit back to 0 using the LDSR
instruction immediately before the RETI instruction.
The solid line shows the CPU processing flow.
1
CHAPTER 19 INTERRUPT/EXCEPTION PROCESSING FUNCTION
Original processing restored
PC
PSW
RETI instruction
Figure 19-10. RETI Instruction Processing
PSW.EP
PSW.NP
Preliminary User’s Manual U18953EJ1V0UD
0
0
EIPC
EIPSW
1
PC
PSW
FEPC
FEPSW