EP4SE530H35C2N Altera, EP4SE530H35C2N Datasheet - Page 944

• Manufacturer Part Number: EP4SE530H35C2N
• Description: IC STRATIX IV FPGA 530K 1152HBGA
• Manufacturer: Altera
• Series: STRATIX® IV Er

Specifications of EP4SE530H35C2N

• Number Of Logic Elements/cells: 531200
• Number Of Labs/clbs: 21248
• Total Ram Bits: 27376
• Number Of I /o: 744
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1152-HBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -

5–98
Figure 5–43. Dynamic Reconfiguration Configuration for the S4GX230 Device (Example 2)
Table 5–19. Logical Channel Addressing Combination ×4 Bonded Channels (Example 2) (Part 1 of 2)
Stratix IV Device Handbook Volume 2: Transceivers
What is the number of
channels? option in the
General screen
What is the starting channel
number? option in the
Reconfig screen
ALTGX Setting
Example 2
ALTGX Settings and Instances
Four regular channels
using the CMU0 PLL
Consider a design with the following configuration:
■
■
Figure 5–43
Because this example does not require the use of the alternate CMU transmitter PLL
or additional transmitter PLLs, the logical channel addressing remains the same as
explained in
Table 5–19
Plug-In Manager, the total number of channels in the ALTGX_RECONFIG
MegaWizard Plug-In Manager, and how to connect the ALTGX instances to the
ALTGX_RECONFIG instance.
in the design
Four regular transceiver channels in XAUI configuration.
You can configure these channels from the XAUI configuration (the primary
configuration) to the PCIe Gen2 ×4 configuration (the secondary configuration)
and vice versa.
■
■
Set this option to 0.
The logical channel
addresses of the first to
sixth channels are 0, 1, 2,
and 3, respectively.
lists how to set the starting channel number in the ALTGX MegaWizard
(Regular transceiver
ALTGX Instance 1
shows the arrangement of these channels in the S4GX230 device.
“Logical Channel Addressing” on page
(XAUI Mode)
channels)
4
Transceiver Block GXBR0
CMU1 Channel
CMU0 Channel
Channel 2
Channel 0
Channel 3
Channel 1
What is the number of
channels controlled by the
reconfig controller? option
in the Reconfiguration
settings screen.
ALTGX_RECONFIG Setting
ALTGX_RECONFIG Setting and Instance
Chapter 5: Dynamic Reconfiguration in Stratix IV Devices
—
1
0
5–5.
100 MHz for PIPE
156.25 MHz for XAUI
Gen2 x4 mode
Dynamic Reconfiguration Examples
■
■
■
February 2011 Altera Corporation
Determine the highest
logical channel address
(3).
Round it up to the next
multiple of 4.
Set this option to 4.
ALTGX_RECONFIG
Instance 1
—