upd70f3017ay Renesas Electronics Corporation., upd70f3017ay Datasheet - Page 464

• Manufacturer Part Number: upd70f3017ay
• Description: V850/sa1tm 32-/16-bit Single-chip Microcontroller
• Manufacturer: Renesas Electronics Corporation.

(5)
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
Remark
(6)
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
Remark
464
Infrared reflow
Partial heating
Infrared reflow
Partial heating
Soldering Method
Soldering Method
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
PD703015BYGC-xxx-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD703017AYGC-xxx-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD70F3015BGC-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD70F3017AGC-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD703014BYGC-xxx-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD703017AGC-xxx-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD70F3015BYGC-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD70F3017AYGC-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD703015BGC-xxx-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
PD703014BGC-xxx-8EU-A: 100-pin plastic LQFP (fine pitch) (14 × 14)
Products with -A at the end of the part number are lead-free products.
Products with -A at the end of the part number are lead-free products.
Package peak temperature: 260°C, Time: 60 seconds max. (at 220°C or higher),
Count: Three times or less,
Exposure limit: 7 days
Pin temperature: 350°C max., Time: 3 seconds max. (per pin row)
Package peak temperature: 260°C, Time: 60 seconds max. (at 220°C or higher),
Count: Three times or less,
Exposure limit: 3 days
Pin temperature: 350°C max., Time: 3 seconds max. (per pin row)
Table 19-1. Surface Mounting Type Soldering Conditions (3/4)
CHAPTER 19 RECOMMENDED SOLDERING CONDITIONS
Note
Note
(after that, prebake at 125°C for 20 to 72 hours)
(after that, prebake at 125°C for 20 to 72 hours)
User’s Manual U12768EJ4V1UD
Soldering Conditions
Soldering Conditions
IR60-203-3
IR60-207-3
Recommended
Recommended
Condition
Condition
Symbol
Symbol
–
–