HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 114

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 3 MCU Operating Modes
3.3.5
The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is enabled.
The program in an external ROM connected to the first half of area 0 is executed.
Ports A to C function as an address bus, ports D and E function as a data bus, and parts of ports F
to H carry bus control signals.
The initial bus mode after a reset is 16 bits, with 16-bit access to all areas. However, if 8-bit access
is designated for any area by the bus controller, the bus mode switches to 8 bits.
In the flash memory version, user program mode is entered by setting 1 to the SWE bit of
FLMCR1.
3.3.6
The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is enabled.
The program in an external ROM connected to the first half of area 0 is executed.
Ports A to C function as an address bus, ports D and E function as a data bus, and parts of ports F
to H carry bus control signals.
The initial bus mode after a reset is 8 bits, with 8-bit access to all areas. However, if 16-bit access
is designated for any area by the bus controller, the bus mode switches to 16 bits and port E
functions as a data bus.
In the flash memory version, user program mode is entered by setting 1 to the SWE bit of
FLMCR1.
3.3.7
The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is enabled,
and the chip starts up in single-chip mode. External addresses cannot be used in single-chip mode.
The initial mode after a reset is single-chip mode, with all I/O ports available for use as
input/output ports. However, the mode can be switched to externally expanded mode by setting 1
to the EXPE bit of SYSCR and then the external address space is enabled. When externally
expanded mode is selected, all areas are initially designated as 16-bit access space. The function of
pins in ports A to H is the same as in externally expanded mode with on-chip ROM enabled.
In the flash memory version, user program mode is entered by setting 1 to the SWE bit of
FLMCR1.
Rev. 3.00 Mar 17, 2006 page 62 of 926
REJ09B0283-0300
Mode 5
Mode 6
Mode 7