HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 845

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

19.7
Making a setting in the RAM emulation register (RAMER) enables RAM to be overlapped onto
the part of flash memory area so that data to be programmed to flash memory can be emulated in
the on-chip RAM in real time. Emulation can be performed in user mode or user program mode.
Figure 19.8 shows an example of emulation of real-time flash memory programming.
1. Set RAMER to overlap RAM onto the area for which real-time programming is required.
2. Emulation is performed using the overlapping RAM.
Figure 19.7 Programming/Erasing Flowchart Example in User Program Mode
Flash Memory Emulation in RAM
Note: * Not available in H8S/2678R Group.
program (flash memory programming)
Branch to user program/erase control
Transfer user program/erase control
Execute user program/erase control
Branch to flash memory application
program to RAM
program in RAM
Program/erase?
FWE = high *
Clear FWE *
Reset-start
program
Yes
No
Section 19 Flash Memory (F-ZTAT Version)
Branch to flash memory application
Rev. 3.00 Mar 17, 2006 page 793 of 926
program
REJ09B0283-0300