HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 726

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 Serial Communication Interface (SCI, IrDA)
Bit
5
4
3
2
Rev. 3.00 Mar 17, 2006 page 674 of 926
REJ09B0283-0300
Bit Name
ORER
FER
PER
TEND
Initial Value
0
0
0
1
R/W
R/(W) *
R/(W) *
R/(W) *
R
Description
Overrun Error
[Setting condition]
When the next serial reception is completed while
RDRF = 1
[Clearing condition]
When 0 is written to ORER after reading ORER =
1
Framing Error
[Setting condition]
When the stop bit is 0
[Clearing condition]
When 0 is written to FER after reading FER = 1
In 2-stop-bit mode, only the first stop bit is
checked.
Parity Error
[Setting condition]
When a parity error is detected during reception
[Clearing condition]
When 0 is written to PER after reading PER = 1
Transmit End
[Setting conditions]
[Clearing conditions]
When the TE bit in SCR is 0
When TDRE = 1 at transmission of the last bit
of a 1-byte serial transmit character
When 0 is written to TDRE after reading TDRE
= 1
When the DMAC or DTC is activated by a TXI
interrupt and writes data to TDR