HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 364

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 7 DMA Controller (DMAC)
Full Address Mode (Burst Mode): Figure 7.20 shows a transfer example in which TEND output
is enabled and word-size full address mode transfer (burst mode) is performed from external 16-
bit, 2-state access space to external 16-bit, 2-state access space.
In burst mode, one-byte or one-word transfers are executed consecutively until transfer ends.
In the transfer end cycle (the cycle in which the transfer counter reaches 0), a one-state DMA dead
cycle is inserted after the DMA write cycle.
If a request from another higher-priority channel is generated after burst transfer starts, that
channel has to wait until the burst transfer ends.
If an NMI interrupt is generated while a channel designated for burst transfer is in the transfer
enabled state, the DTME bit in DMABCRL is cleared and the channel is placed in the transfer
disabled state. If burst transfer has already been activated inside the DMAC, the bus is released on
completion of a one-byte or one-word transfer within the burst transfer, and burst transfer is
suspended. If the last transfer cycle of the burst transfer has already been activated inside the
DMAC, execution continues to the end of the transfer even if the DTME bit is cleared.
Rev. 3.00 Mar 17, 2006 page 312 of 926
REJ09B0283-0300
Address bus
TEND
HWR
Bus release
LWR
RD
Figure 7.20 Example of Full Address Mode Transfer (Burst Mode)
DMA
read
DMA
write
DMA
read
Burst transfer
DMA
write
DMA
read
Last transfer cycle
DMA
write
DMA
dead
Bus release