Z8FMC160100KITG Zilog, Z8FMC160100KITG Datasheet - Page 260

• Manufacturer Part Number: Z8FMC160100KITG
• Description: KIT DEV FOR Z8 ENCORE Z8FMC16100
• Manufacturer: Zilog
• Series: Z8 Encore! MC™r

Specifications of Z8FMC160100KITG

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: Z8FMC16100
• Primary Attributes: 3-Ph DC Motors
• Secondary Attributes: Graphical User Interface
• For Use With: 269-4664 - KIT ACC OPTO-ISO USB SMART CABLE269-4661 - KIT ACC ETHERNET SMART CABLE269-4539 - KIT ACCESSORY USB SMART CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4660

PS024613-0910
Write Register—
written 1
not in DEBUG mode, the address and data values are discarded. If the Read Protect option
bit is enabled, then only writes to the on-chip peripheral registers are allowed and all other
register write data values are discarded.
DBG
DBG
DBG
DBG
DBG
Read Register—
be read 1
is not in DEBUG mode or if the Read Protect option bit is enabled and on-chip RAM is
being read from, this command returns
DBG
DBG
DBG
DBG
DBG
Write Program Memory—
Memory. This command is equivalent to the LDC and LDCI instructions. Data can be
written 1–65536 bytes at a time (65536 bytes can be written by setting size to 0). The on-
chip Flash controller must be written to and unlocked for the programming operation to
occur. If the Flash controller is not unlocked, the data is discarded. If the device is not in
DEBUG mode or if the Read Protect option bit is enabled, the data is discarded.
DBG
DBG
DBG
DBG
DBG
DBG
Read Program Memory—
Program Memory. This command is equivalent to the LDC and LDCI instructions. Data
can be read 1 to 65536 bytes at a time (65536 bytes can be read by setting size to 0). If the
device is not in DEBUG mode or if the Read Protect option bit is enabled, this command
returns
DBG
DBG
DBG



















FFh
-
08h
{4’h0,Register Address[11:8]}
Register Address[7:0]
Size[7:0]
1-256 data bytes
-
09h
{4’h0,Register Address[11:8]
Register Address[7:0]
Size[7:0]
1-256 data bytes
0Ah
Program Memory Address[15:8]
Program Memory Address[7:0]
Size[15:8]
Size[7:0]
1-65536 data bytes
0Bh
Program Memory Address[15:8]
Program Memory Address[7:0]
256 bytes at a time (256 bytes are written by setting size to zero). If the device is
256 bytes at a time (256 bytes can be read by setting size to zero). If the device
for the data.
The Read register command reads data from the Register File. Data can
The Write register command writes data to the Register File. Data can be
The Read Program Memory command reads data from 
The Write Program Memory command writes data to Program
FFh
for all the data values.
Z8FMC16100 Series Flash MCU
On-Chip Debugger Commands
Product Specification
248