Z8FMC160100KITG Zilog, Z8FMC160100KITG Datasheet - Page 261

• Manufacturer Part Number: Z8FMC160100KITG
• Description: KIT DEV FOR Z8 ENCORE Z8FMC16100
• Manufacturer: Zilog
• Series: Z8 Encore! MC™r

Specifications of Z8FMC160100KITG

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: Z8FMC16100
• Primary Attributes: 3-Ph DC Motors
• Secondary Attributes: Graphical User Interface
• For Use With: 269-4664 - KIT ACC OPTO-ISO USB SMART CABLE269-4661 - KIT ACC ETHERNET SMART CABLE269-4539 - KIT ACCESSORY USB SMART CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4660

PS024613-0910
DBG
DBG
DBG
Write Data Memory—
This command is equivalent to the LDE and LDEI instructions. Data can be written 1 to
65536 bytes at a time (65536 bytes can be written by setting size to 0). If the device is not
in DEBUG mode or if the Read Protect option bit is enabled, the data is discarded.
DBG
DBG
DBG
DBG
DBG
DBG
Read Data Memory—
command is equivalent to the LDE and LDEI instructions. Data can be read 1 to 65536
bytes at a time (65536 bytes can be read by setting size to 0). If the device is not in
DEBUG mode, this command returns
DBG
DBG
DBG
DBG
DBG
DBG
Read Program Memory CRC—
and returns the CRC (cyclic redundancy check) of Program Memory using the 16-bit
CRC-CCITT polynomial (x
icant bit of the data is shifted through the polynomial first. The CRC is inverted when it is
transmitted. If the device is not in DEBUG mode, this command returns
CRC value. Unlike most other OCD Read commands, there is a delay from issuing of the
command until the OCD returns the data. The OCD reads the Program Memory, calculates
the CRC value, and returns the result. The delay is a function of the Program Memory size
and is approximately equal to the system clock period multiplied by the number of bytes in
the Program Memory.
DBG
DBG
DBG


















Size[15:8]
Size[7:0]
1-65536 data bytes
0Ch
Data Memory Address[15:8]
Data Memory Address[7:0]
Size[15:8]
Size[7:0]
1-65536 data bytes
0Dh
Data Memory Address[15:8]
Data Memory Address[7:0]
Size[15:8]
Size[7:0]
1-65536 data bytes
0Eh
CRC[15:8]
CRC[7:0]
The Read Data Memory command reads from Data Memory. This
The Write Data Memory command writes data to Data Memory.
16
+ x
The Read Program Memory CRC command computes
12
+ x
FFh
5
+ 1). The CRC is preset to all 1s. The least-signif-
for the data.
Z8FMC16100 Series Flash MCU
On-Chip Debugger Commands
Product Specification
FFFFh
for the
249