Z8FMC160100KITG Zilog, Z8FMC160100KITG Datasheet - Page 89

• Manufacturer Part Number: Z8FMC160100KITG
• Description: KIT DEV FOR Z8 ENCORE Z8FMC16100
• Manufacturer: Zilog
• Series: Z8 Encore! MC™r

Specifications of Z8FMC160100KITG

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: Z8FMC16100
• Primary Attributes: 3-Ph DC Motors
• Secondary Attributes: Graphical User Interface
• For Use With: 269-4664 - KIT ACC OPTO-ISO USB SMART CABLE269-4661 - KIT ACC ETHERNET SMART CABLE269-4539 - KIT ACCESSORY USB SMART CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4660

PS024613-0910
Bit Position
[7]
PWMOFF
[6]
OUTCTL
[5]
ALIGN
[4]
Reserved
[3]
ADCTRIG
[2]
Reserved
[1]
READY
[0]
PWMEN
Value (H)
0
1
0
1
0
1
0
1
0
0
1
0
1
Description
Place PWM outputs in off-state
Disable modulator control of PWM pins. Outputs are in predefined off-
state. This is not dependent on the reload event.
Re-enable modulator control of PWM pins at next PWM reload event.
PWM Output Control
PWM outputs are controlled by the PWM.
PWM outputs selectively disabled (set to off-state) according to values in
the OUTx bits of the PWMOUT register.
PWM Edge Alignment
PWM outputs are edge aligned.
PWM outputs are center aligned.
Reserved.
ADC Trigger Enable
No ADC trigger pulses.
ADC trigger enabled.
Reserved.
Values Ready for Next Reload Event
PWM values (pre-scale, period, and duty cycle) are not ready. Do not
use values in holding registers at next PWM reload event.
PWM values (pre-scale, period, and duty cycle) are ready. Transfer all
values from temporary holding registers to working registers at next
PWM reload event.
PWM Enable
PWM is disabled and enabled PWM output pins are forced to default
off-state. PWM master counter is stopped. Certain control registers may
only written in this state.
PWM is enabled and PWM output pins are enabled as outputs.
Z8FMC16100 Series Flash MCU
Product Specification
PWM Control 0 Register
77