Z8FMC160100KITG Zilog, Z8FMC160100KITG Datasheet - Page 323

• Manufacturer Part Number: Z8FMC160100KITG
• Description: KIT DEV FOR Z8 ENCORE Z8FMC16100
• Manufacturer: Zilog
• Series: Z8 Encore! MC™r

Specifications of Z8FMC160100KITG

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: Z8FMC16100
• Primary Attributes: 3-Ph DC Motors
• Secondary Attributes: Graphical User Interface
• For Use With: 269-4664 - KIT ACC OPTO-ISO USB SMART CABLE269-4661 - KIT ACC ETHERNET SMART CABLE269-4539 - KIT ACCESSORY USB SMART CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4660

PS024613-0910
Bit
Position
[7]
PWMOFF
[6]
OUTCTL
[5]
ALIGN
[4]
Reserved
[3]
ADCTRIG
[2]
Reserved
[1]
READY
[0]
PWMEN
Value (H) Description
0
1
0
1
0
1
0
1
0
0
1
0
1
Place PWM outputs in off-state
Disable modulator control of PWM pins. Outputs are in predefined off-state. This
is not dependent on the reload event.
Re-enable modulator control of PWM pins at next PWM reload event.
PWM Output Control
PWM outputs are controlled by the Pulse Width Modulator.
PWM outputs selectively disabled (set to off-state) according to values in the
OUTx bits of the PWMOUT register.
PWM Edge Alignment
PWM outputs are edge aligned.
PWM outputs are center aligned.
Reserved
ADC Trigger Enable
No ADC trigger pulses.
ADC trigger enabled.
Reserved
Values Ready for Next Reload Event
PWM values (pre-scale, period, and duty cycle) are not ready. Do not use values
in holding registers at next PWM reload event.
PWM values (pre-scale, period, and duty cycle) are ready. Transfer all values
from temporary holding registers to working registers at next PWM reload event.
PWM Enable
PWM is disabled and enabled PWM output pins are forced to default off-state.
PWM master counter is stopped. Certain control registers may only written in this
state.
PWM is enabled and PWM output pins are enabled as outputs.
Z8FMC16100 Series Flash MCU
Appendix A—Register Tables
Product Specification
311