EP2AGX65DF29I5N Altera, EP2AGX65DF29I5N Datasheet - Page 184

• Manufacturer Part Number: EP2AGX65DF29I5N
• Description: IC ARRIA II GX FPGA 65K 780FBGA
• Manufacturer: Altera
• Series: Arria II GXr

Specifications of EP2AGX65DF29I5N

• Number Of Logic Elements/cells: 60214
• Number Of Labs/clbs: 2530
• Total Ram Bits: 5246
• Number Of I /o: 364
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 780-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -

6–26
Arria II OCT Calibration
Arria II Device Handbook Volume 1: Device Interfaces and Integration
OCT Calibration Block
f
1
Arria II GX devices support calibrated R
calibrated R
the OCT calibration blocks available in the device provided the V
with the pins using calibrated OCT matches the V
calibration block and its associated RUP and RDN pins.
For more information about the location of the OCT calibration blocks in Arria II
devices, refer to the
Pin-Outs.
An OCT calibration block has the same V
R
standards, up to the number of available OCT calibration blocks. You can configure
I/O banks to receive calibrated codes from any OCT calibration block with the same
V
that particular I/O bank has an OCT calibration block.
For example,
voltage. If a group of I/O banks has the same V
calibration block to calibrate the group of I/O banks placed around the periphery.
Because banks 3B, 4C, 6C, and 7B have the same V
all four I/O banks (3B, 4C, 6C, and 7B) with the OCT calibration block (CB7) located
in bank 7A. You can enable this by serially shifting out R
the OCT calibration block located in bank 7A to the I/O banks located around the
periphery.
I/O banks that do not contain calibration blocks share calibration blocks with I/O
banks that do contain calibration blocks.
S
CCIO
OCT calibration is supported on all user I/O banks with different V
. All I/O banks with the same V
S
and R
Figure 6–10
T
Arria II Device Family Connection Guidelines
OCT on all I/O pins. You can calibrate the I/O banks with any of
shows a group of I/O banks that has the same V
CCIO
S
CCIO
can share one OCT calibration block, even if
OCT and Arria II GZ devices support
as the I/O bank that contains the block.
CCIO
CCIO
CCIO
voltage, you can use one OCT
Chapter 6: I/O Features in Arria II Devices
of the I/O bank with the
as bank 7A, you can calibrate
S
OCT calibration codes from
December 2010 Altera Corporation
and
CCIO
Arria II Device
Arria II OCT Calibration
of the I/O bank
CCIO
CCIO
voltage