PIC12F1840-I/P Microchip Technology, PIC12F1840-I/P Datasheet - Page 157

• Manufacturer Part Number: PIC12F1840-I/P
• Description: 7 KB Flash, 256 Bytes RAM, 32 MHz Int. Osc, 6 I/0, Enhanced Mid Range Core 8 PDI
• Manufacturer: Microchip Technology

Specifications of PIC12F1840-I/P

• Processor Series: PIC12F
• Core: PIC
• Program Memory Type: Flash
• Program Memory Size: 7 KB
• Data Ram Size: 256 B
• Interface Type: MI2C, SPI, EUSART
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Package / Case: PDIP-8
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 19-1:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R/W-0/0
C1ON
C1ON: Comparator Enable bit
1 = Comparator is enabled and consumes no active power
0 = Comparator is disabled
C1OUT: Comparator Output bit
If C1POL = 1 (inverted polarity):
1 = C1VP < C1VN
0 = C1VP > C1VN
If C1POL = 0 (non-inverted polarity):
1 = C1VP > C1VN
0 = C1VP < C1VN
C1OE: Comparator Output Enable bit
1 = C1OUT is present on the C1OUT pin. Requires that the associated TRIS bit be cleared to actually
0 = C1OUT is internal only
C1POL: Comparator Output Polarity Select bit
1 = Comparator output is inverted
0 = Comparator output is not inverted
Unimplemented: Read as ‘0’
C1SP: Comparator Speed/Power Select bit
1 = Comparator operates in normal power, higher speed mode
0 = Comparator operates in low-power, low-speed mode
C1HYS: Comparator Hysteresis Enable bit
1 = Comparator hysteresis enabled
0 = Comparator hysteresis disabled
C1SYNC: Comparator Output Synchronous Mode bit
1 = Comparator output to Timer1 and I/O pin is synchronous to changes on Timer1 clock source.
0 = Comparator output to Timer1 and I/O pin is asynchronous.
C1OUT
R-0/0
drive the pin. Not affected by C1ON.
Output updated on the falling edge of Timer1 clock source.
CM1CON0: COMPARATOR C1 CONTROL REGISTER 0
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-0/0
C1OE
R/W-0/0
C1POL
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U-0
—
R/W-1/1
C1SP
PIC12(L)F1840
R/W-0/0
C1HYS
DS41441B-page 157
C1SYNC
R/W-0/0
bit 0