S9S12HY64J0MLL Freescale Semiconductor, S9S12HY64J0MLL Datasheet - Page 654

• Manufacturer Part Number: S9S12HY64J0MLL
• Description: MCU 64K FLASH AUTO 100-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12HY64J0MLL

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SCI, SPI
• Peripherals: LCD, Motor control PWM, POR, PWM, WDT
• Number Of I /o: 80
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 100-LQFP
• Controller Family/series: S12
• No. Of I/o's: 80
• Ram Memory Size: 4KB
• Cpu Speed: 64MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: S12HY
• Core: HCS12
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12HY64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

64 KByte Flash Module (S12FTMRC64K1V1)
17.4.5.12 Set User Margin Level Command
The Set User Margin Level command causes the Memory Controller to set the margin level for future read
operations of the P-Flash or D-Flash block.
Upon clearing CCIF to launch the Set User Margin Level command, the Memory Controller will set the
user margin level for the targeted block and then set the CCIF flag.
Valid margin level settings for the Set User Margin Level command are defined in
654
Register
FSTAT
When the D-Flash block is targeted, the D-Flash user margin levels are
applied only to the D-Flash reads. However, when the P-Flash block is
targeted, the P-Flash user margin levels are applied to both P-Flash and
D-Flash reads. It is not possible to apply user margin levels to the P-Flash
block only.
CCOBIX[2:0]
Table 17-53. Set User Margin Level Command FCCOB Requirements
Table 17-52. Verify Backdoor Access Key Command Error Handling
000
001
MGSTAT1
MGSTAT0
ACCERR
Error Bit
FPVIOL
1
2
(CCOBIX=001)
Table 17-54. Valid Set User Margin Level Settings
Read margin to the erased state
Read margin to the programmed state
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
0x0000
0x0001
0x0002
CCOB
Set if CCOBIX[2:0] != 100 at command launch
Set if an incorrect backdoor key is supplied
Set if backdoor key access has not been enabled (KEYEN[1:0] != 10, see
Section
Set if the backdoor key has mismatched since the last reset
None
None
None
0x0D
17.3.2.2)
NOTE
Return to Normal Level
FCCOB Parameters
User Margin-1 Level
User Margin-0 Level
Margin level setting
Level Description
Global address [17:16] to identify the
Error Condition
1
2
Flash block
Table
Freescale Semiconductor
17-54.