LPC2468FBD208,551 NXP Semiconductors, LPC2468FBD208,551 Datasheet - Page 259

• Manufacturer Part Number: LPC2468FBD208,551
• Description: IC ARM7 MCU FLASH 512K 208-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FBD208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-LQFP
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4261; 935282457551; LPC2468FBD208-S

NXP Semiconductors
UM10237_4
User manual
descriptors to be read is determined by the total number of descriptors owned by the
hardware: RxConsumeIndex - RxProduceIndex - 1. Block transferring of descriptors
minimizes memory load. Read data returned from memory is buffered and consumed as
needed.
RX DMA manager receives data
After reading the descriptor, the receive DMA engine waits for the MAC to return receive
data from the (R)MII interface that passes the receive filter. Receive frames that do not
match the filtering criteria are not passed to memory. Once a frame passes the receive
filter, the data is written in the fragment buffer associated with the descriptor. The Rx DMA
does not write beyond the size of the buffer. When a frame is received that is larger than a
descriptor’s fragment buffer, the frame will be written to multiple fragment buffers of
consecutive descriptors. In the case of a multi-fragment reception, all but the last fragment
in the frame will return a status where the LastFrag bit is set to 0. Only on the last
fragment of a frame the LastFrag bit in the status will be set to 1. If a fragment buffer is the
last of a frame, the buffer may not be filled completely. The first receive data of the next
frame will be written to the fragment buffer of the next descriptor.
After receiving a fragment, the Rx DMA manager writes status information back to the
StatusInfo and StatusHashCRC words of the status. The Ethernet block writes the size in
bytes of a descriptor’s fragment buffer in the RxSize field of the Status word. The value of
the RxProduceIndex is only updated after the fragment data and the fragment status
information has been committed to memory, which is checked by an internal tag protocol
in the memory interface. The Rx DMA manager continues to receive frames until the
descriptor array is full. If the descriptor array is full, the Ethernet hardware will set the
RxFinishedInt bit of the IntStatus register. The receive datapath will still be enabled. If the
receive descriptor array is full any new receive data will generate an overflow error and
interrupt.
Update ProduceIndex
Each time the Rx DMA manager commits a data fragment and the associated status word
to memory, it completes the reception of a descriptor and increments the RxProduceIndex
(taking wrap around into account) in order to hand the descriptor back to the device driver
software. Software can re-use the descriptor for new receptions by handing it back to
hardware when the receive data has been processed.
The device driver software can keep track of the progress of the DMA manager by reading
the RxProduceIndex register to see how far along the receive process is. When the Rx
descriptor array is emptied completely, the RxProduceIndex retains its last value.
Write reception status
After the frame has been received from the (R)MII bus, the StatusInfo and
StatusHashCRC words of the frame descriptor are
updated by the DMA manager.
If the descriptor is for the last fragment of a frame (or for the whole frame if there are no
fragments), then depending on the success or failure of the frame reception, error flags
(Error, NoDescriptor, Overrun, AlignmentError, RangeError, LengthError, SymbolError, or
CRCError) are set in StatusInfo. The RxSize field is set to the number of bytes actually
written to the fragment buffer, -1 encoded. For fragments not being the last in the frame
the RxSize will match the size of the buffer. The hash CRCs of the destination and source
Rev. 04 — 26 August 2009
Chapter 11: LPC24XX Ethernet
UM10237
© NXP B.V. 2009. All rights reserved.
259 of 792