LPC2468FBD208,551 NXP Semiconductors, LPC2468FBD208,551 Datasheet - Page 261

• Manufacturer Part Number: LPC2468FBD208,551
• Description: IC ARM7 MCU FLASH 512K 208-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FBD208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-LQFP
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4261; 935282457551; LPC2468FBD208-S

NXP Semiconductors
UM10237_4
User manual
The receive datapath can generate four different interrupt types:
All of the above interrupts can be enabled and disabled by setting or resetting the
corresponding bits in the IntEnable register. Enabling or disabling does not affect the
IntStatus register contents, only the propagation of the interrupt status to the CPU (via the
Vectored Interrupt Controller).
The interrupts, either of individual frames or of the whole list, are a good means of
communication between the DMA manager and the device driver, triggering the device
driver to inspect the status words of descriptors that have been processed.
Device driver processes receive data
As a response to status (e.g. RxDoneInt) interrupts or polling of the RxProduceIndex, the
device driver can read the descriptors that have been handed over to it by the hardware
(RxProduceIndex - RxConsumeIndex). The device driver should inspect the status words
in the status array to check for multi-fragment receptions and receive errors.
The device driver can forward receive data and status to upper software layers. After
processing of data and status, the descriptors, statuses and data buffers may be recycled
and handed back to hardware by incrementing the RxConsumeIndex.
Receive example
Figure 11–31
•
•
•
•
If the Interrupt bit in the descriptor Control field is set, the Rx DMA will set the
RxDoneInt bit in the IntStatus register after receiving a fragment and committing the
associated data and status to memory. Even if a descriptor (fragment) is not the last in
a multi-fragment frame, the Interrupt bit in the descriptor can be used to generate an
interrupt.
If the descriptor array is full while the Ethernet hardware is enabled, the hardware will
set the RxFinishedInt bit of the IntStatus register.
If the AHB interface does not consume receive statuses at a sufficiently high
bandwidth, the receive status process may overrun, in which case the RxOverrun bit
will be set in the IntStatus register.
If there is a receive error (AlignmentError, RangeError, LengthError, SymbolError, or
CRCError), or a multi-fragment frame where the device driver did provide descriptors
for the initial fragments but did not provide the descriptors for the rest of the
fragments, or if a nonfatal data Overrun occurred, the hardware will set the RxErrorInt
bit of the IntStatus register.
illustrates the receive process in an example receiving a frame of 19 bytes.
Rev. 04 — 26 August 2009
Chapter 11: LPC24XX Ethernet
UM10237
© NXP B.V. 2009. All rights reserved.
261 of 792