mc9s12vr48 Freescale Semiconductor, Inc, mc9s12vr48 Datasheet - Page 226

• Manufacturer Part Number: mc9s12vr48
• Description: S12 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

S12S Debug Module (S12SDBGV2)
6.4.3.4
In case of simultaneous matches the priority is resolved according to
suppressed. It is thus possible to miss a lower priority match if it occurs simultaneously with a higher
priority. The priorities described in
pointing to final state has highest priority followed by the lower channel number (0,1,2).
6.4.4
The state sequencer allows a defined sequence of events to provide a trigger point for tracing of data in the
trace buffer. Once the DBG module has been armed by setting the ARM bit in the DBGC1 register, then
state1 of the state sequencer is entered. Further transitions between the states are then controlled by the
state control registers and channel matches. From Final State the only permitted transition is back to the
disarmed state0. Transition between any of the states 1 to 3 is not restricted. Each transition updates the
SSF[2:0] flags in DBGSR accordingly to indicate the current state.
Alternatively writing to the TRIG bit in DBGSC1, provides an immediate trigger independent of
comparator matches.
Independent of the state sequencer, each comparator channel can be individually configured to generate an
immediate breakpoint when a match occurs through the use of the BRK bits in the DBGxCTL registers.
Thus it is possible to generate an immediate breakpoint on selected channels, whilst a state sequencer
transition can be initiated by a match on other channels. If a debug session is ended by a match on a channel
the state sequencer transitions through Final State for a clock cycle to state0. This is independent of tracing
226
Highest
Priority
Lowest
State Sequence Control
Channel Priorities
(Disarmed)
State 0
ARM = 0
Channel pointing to Final State
Match0 (force or tag hit)
Match1 (force or tag hit)
Match2 (force or tag hit)
ARM = 0
Session Complete
Source
TRIG
(Disarm)
MC9S12VR Family Reference Manual,
Preliminary - Subject to Change Without Notice
ARM = 1
ARM = 0
Figure 6-24. State Sequencer Diagram
Table 6-36
Table 6-36. Channel Priorities
dictate that in the case of simultaneous matches, the match
Final State
Transition to next state as defined by state control registers
Transition to next state as defined by state control registers
Transition to next state as defined by state control registers
Transition to next state as defined by state control registers
State1
Rev. 2.2
Enter Final State
State3
Table
Action
6-36. The lower priority is
State2
Freescale Semiconductor