EP3C25F324I7 Altera, EP3C25F324I7 Datasheet - Page 111

• Manufacturer Part Number: EP3C25F324I7
• Description: IC CYCLONE III FPGA 25K 324 FBGA
• Manufacturer: Altera
• Series: Cyclone® IIIr

Specifications of EP3C25F324I7

• Number Of Logic Elements/cells: 24624
• Number Of Labs/clbs: 1539
• Total Ram Bits: 608256
• Number Of I /o: 215
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 324-FBGA
• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 24624
• # I/os (max): 215
• Frequency (max): 437.5MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 24624
• Ram Bits: 608256
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: FBGA
• For Use With: 544-2370 - KIT STARTER CYCLONE III EP3C25
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Chapter 6: I/O Features in the Cyclone III Device Family
I/O Standards
I/O Standards
© December 2009
f
Altera Corporation
Figure 6–5
shown is the intrinsic transistor impedance.
Figure 6–5. Cyclone III Device Family On-Chip Series Termination Without Calibration
All I/O banks and I/O pins support impedance matching and series termination.
Dedicated configuration pins and JTAG pins do not support impedance matching or
series termination.
On-chip series termination is supported on any I/O bank. V
compatible for all I/O pins to enable on-chip series termination in a given I/O bank.
I/O standards that support different R
long as their V
Impedance matching is implemented using the capabilities of the output driver and is
subject to a certain degree of variation, depending on the process, voltage, and
temperature.
For more information about tolerance specification, refer to the
Sheet
The Cyclone III device family supports multiple single-ended and differential I/O
standards. Apart from 3.3-, 3.0-, 2.5-, 1.8-, and 1.5-V support, the Cyclone III device
family also supports 1.2-V I/O standards.
and
Cyclone III LS Device Data Sheet
shows the single-ended I/O standards for OCT without calibration. The R
CCIO
and V
Cyclone III Device Family
Driver Series Termination
REF
are not conflicting.
V
GND
CCIO
R
R
S
S
S
values can reside in the same I/O bank as
chapters.
Z
O
Receiving
Cyclone III Device Handbook, Volume 1
Device
CCIO
Cyclone III Device Data
and V
REF
must be
6–11
S