EP3C25F324I7 Altera, EP3C25F324I7 Datasheet - Page 233

• Manufacturer Part Number: EP3C25F324I7
• Description: IC CYCLONE III FPGA 25K 324 FBGA
• Manufacturer: Altera
• Series: Cyclone® IIIr

Specifications of EP3C25F324I7

• Number Of Logic Elements/cells: 24624
• Number Of Labs/clbs: 1539
• Total Ram Bits: 608256
• Number Of I /o: 215
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 324-FBGA
• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 24624
• # I/os (max): 215
• Frequency (max): 437.5MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 24624
• Ram Bits: 608256
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: FBGA
• For Use With: 544-2370 - KIT STARTER CYCLONE III EP3C25
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Chapter 9: Configuration, Design Security, and Remote System Upgrades in the Cyclone III Device Family
Design Security
Design Security
Cyclone III LS Design Security Protection
AES Decryption Block
© December 2009
f
f
Altera Corporation
The design security feature is for Cyclone III LS devices only. The design security
feature is not supported in Cyclone III devices.
Cyclone III LS device designs are protected from copying, reverse engineering, and
tampering using configuration bitstream encryption and anti-tamper features.
Security Against Copying
The volatile key is securely stored in the Cyclone III LS device and cannot be read out
through any interfaces. The information of your design cannot be copied because the
configuration file read-back feature is not supported in Cyclone III LS devices.
Security Against Reverse Engineering
Reverse engineering from an encrypted configuration file is very difficult and time
consuming because Cyclone III LS configuration file formats are proprietary and the
file contains million of bits which require specific decryption. Reverse engineering the
Cyclone III LS device is just as difficult because the device is manufactured on the
advanced 60-nm process technology.
Security Against Tampering
Cyclone III LS devices support the following anti-tamper features:
■
■
■
For more information about anti-tamper protection for Cyclone III LS devices, refer to
AN 593: Anti-Tamper Protection for Cyclone III LS
For more information about the implementation of secure configuration flow in
Quartus II, refer to
The main purpose of the AES decryption block is to decrypt the configuration
bitstream prior to entering configuration. Prior to receiving encrypted data, you must
enter and store the 256-bit volatile key in the device with battery backup. The key is
scrambled prior to storing it in the key storage to make it more difficult for anyone to
retrieve the stored key using de-capsulation of the device.
Ability to limit JTAG instruction set and provides protection against configuration
data readback over the JTAG port
Ability to clear contents of FPGA logic, configuration memory, user memory, and
volatile key
Error detection (ED) cycle indicator to core Cyclone III LS devices provide a pass
or fail indicator at every ED cycle and visibility over intentional or unintentional
change of CRAM bits.
AN 589: Using Design Security Feature in Cyclone III LS
Devices.
Cyclone III Device Handbook, Volume 1
Devices.
9–73