EP3C25F324I7 Altera, EP3C25F324I7 Datasheet - Page 244

• Manufacturer Part Number: EP3C25F324I7
• Description: IC CYCLONE III FPGA 25K 324 FBGA
• Manufacturer: Altera
• Series: Cyclone® IIIr

Specifications of EP3C25F324I7

• Number Of Logic Elements/cells: 24624
• Number Of Labs/clbs: 1539
• Total Ram Bits: 608256
• Number Of I /o: 215
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 324-FBGA
• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 24624
• # I/os (max): 215
• Frequency (max): 437.5MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 24624
• Ram Bits: 608256
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: FBGA
• For Use With: 544-2370 - KIT STARTER CYCLONE III EP3C25
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

9–84
Table 9–27. Remote System Upgrade Control Register Contents
Cyclone III Device Handbook, Volume 1
Wd_timer[11..0]
Ru_address[21..0] 22'b0000000000000000000000
Rsv1
Wd_en
Osc_int
Cd_early
Rsv2
Note to
(1) Option bit for the application configuration.
Control Register Bit
Table
(1)
9–27:
(1)
1
Figure 9–36. Remote System Upgrade Control Register
When enabled, the early CONF_DONE check (Cd_early) option bit ensures that there
is a valid configuration at the boot address specified by the factory configuration and
that it is of the proper size. If an invalid configuration is detected or CONF_DONE pin is
asserted too early, the device resets and then reconfigures the factory configuration
image. The internal oscillator, as startup state machine clock (Osc_int) option bit,
ensures a functional startup clock to eliminate the hanging of startup when enabled.
When all option bits are turned on, they provide complete coverage for the
programming and startup portions of the application configuration. It is strongly
recommended that you turn on both the Cd_early and Osc_int option bits.
The Cd_early and Osc_int option bits for the application configuration must be
turned on by the factory configuration.
Remote System Upgrade Status Register
The remote system upgrade status register specifies the reconfiguration trigger
condition. The various trigger and error conditions include:
■
■
■
Cyclical redundancy check (CRC) error during application configuration
nSTATUS assertion by an external device due to an error
Cyclone III device family logic array triggered a reconfiguration cycle, possibly
after downloading a new application configuration image
12'b000000000000
1'b0
1'b1
1’b1
1’b1
1'b1
Chapter 9: Configuration, Design Security, and Remote System Upgrades in the Cyclone III Device Family
Rsv2
38
Cd_early Osc_int Wd_en Rsv1 Ru_address[21..0] Wd_timer[11..0]
Value
37
36
35
User watchdog time-out value (most significant 12 bits of
29-bit count value:
{Wd_timer[11..0],17'b1000})
Configuration address (most significant 22 bits of 24-bit
boot address value:
boot_address[23:0] =
{Ru_address[21..0],2'b0})
Reserved bit
User watchdog timer enable bit
Internal oscillator as startup state machine clock enable bit
Early CONF_DONE check
Reserved bit
34 33
Definition
© December 2009 Altera Corporation
12 11
Remote System Upgrade
0