MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 1203

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

TPU3 ROM Functions
D.19 Read/Write Timers and Pin TPU3 Function (RWTPIN)
The RWTPIN Bank 1 TPU3 function enables the RCPU to read, via locations in PRAM, both the TCR1
and TCR2 timer counters, and than selectively load TCR1 or TCR2 with a RCPU-supplied value contained
in PRAM. The function also allows control of the pin state and direction of the RWTPIN channel.
A pin-state parameter is maintained in PRAM and is updated upon every service request. It can contain a
value of the current pin state whether the pin is programmed as an input or output.
The function also receives links. Upon receipt, it will read the two TCRs into PRAM, updating the
pin-state parameter and generating a maskable interrupt request to the RCPU.
The RCPU can control the channel pin, the TCRs, or both. To control the channel pin only, the ‘read TCR’
option is used and the values returned ignored. Because this function controls the TCRs without affecting
the channel pin, it can run on a TPU3 channel whose pin is controlled by a function running on another
channel (for example, a slave stepper-motor channel). See Freescale TPU Progamming Note Using The
TPU Function Library And TPU Emulation Mode, (TPUPN00/D).
Figure D-30
shows all of the host interface areas for the PTA function.
MPC561/MPC563 Reference Manual, Rev. 1.2
Freescale Semiconductor
D-51