MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 695

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Chapter 16
CAN 2.0B Controller Module
The MPC561/MPC563 contains three CAN 2.0B controller modules (TouCAN). Each TouCAN is a
communication controller that implements the Controller Area Network (CAN) protocol, an asynchronous
communications protocol used in automotive and industrial control systems. It is a high speed (one
Mbit/sec), short distance, priority based protocol that can run over a variety of mediums (for example, fiber
optic cable or an unshielded twisted pair of wires). The TouCAN supports both the standard and extended
identifier (ID) message formats specified in the CAN protocol specification, revision 2.0, part B. The third
TouCAN has its signals muxed with MIOS14 GPIO or QSMCM SCI2 signals. These signals are
configured as GPIO inputs at reset and must be changed to TouCAN signals in the MIOS before enabling
the TouCAN.
Each TouCAN module contains 16 message buffers that are used for transmit and receive functions. It also
contains message filters, which are used to qualify the received message IDs when comparing them to the
receive buffer identifiers.
16.1
Each TouCAN module provides these features:
Freescale Semiconductor
•
Full implementation of CAN protocol specification, version 2.0 A/B
— Standard data and remote frames (up to 109 bits long)
— Extended data and remote frames (up to 127 bits long)
Features
Figure 16-1
MPC561/MPC563 Reference Manual, Rev. 1.2
Figure 16-1. TouCAN Block Diagram
Message
16 Rx/Tx
Buffers
shows a block diagram of a TouCAN module.
Interface Unit
Slave Bus
16-bit
Counter
Control
IMB
Transmitter
Receiver
CNTX0
CNRX0
16-1