MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 99

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Chapter 2
Signal Descriptions
This chapter describes the MPC561/MPC563 microcontroller’s external signals. It contains a description
of individual signals, shows their behavior, shows whether the signal is an input or an output, and indicates
signal multiplexing.
Refer to
for detailed electrical information for each signal.
2.1
Figure 2-1
Freescale Semiconductor
Appendix F, “Electrical
Signal Groupings
illustrates the external signals of the MPC561/MPC563 grouped by functional module.
A bar over a signal name indicates that the signal is active-low—for
example, TA (transfer acknowledge). Active-low signals are referred to as
asserted (active) when they are low and negated when they are high. Signals
that are not active-low, such as ADDR[8:31] (address bus signals) and
DATA[0:31] (data bus signals) are referred to as asserted when they are high
and negated when they are low.
MPC561/MPC563 Reference Manual, Rev. 1.2
Characteristics,” and
NOTE
Appendix G, “66-MHz Electrical
Characteristics,”
2-1