MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 91

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

1.3.3.3
1.3.3.4
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
12 dedicated PWM sub-modules (PWMSM)
One MIOS14 16-bit parallel port I/O sub-modules (MPIOSM)
Two queued analog-to-digital converter modules (QADC64E_A, QADC64E_B) providing a total
of 32 analog channels
16 analog input channels on each QADC64E module using internal multiplexing
Directly supports up to four external multiplexers
Up to 41 total input channels on the two QADC64E modules with external multiplexing
Software configurable to operate in enhanced or legacy (MPC555 compatible) mode
Unused analog channels can be used as digital input/output signals
— GPIO on all channels in enhanced mode
10-bit A/D converter with internal sample/hold
Minimum conversion time of 7 µs (with typical QCLK frequency, 2 MHz) and +/- 2 bits accuracy
Two conversion command queues of variable length
Automated queue modes initiated by:
— External edge trigger
— Software command
— Periodic/interval timer within the QADC64E module, that can be assigned to both queue 1 and
— External gated trigger (queue 1 only)
64 result registers
— Output data is right- or left-justified, signed or unsigned.
Alternate reference input (ALTREF), with control in the conversion command word (CCW)
Three TouCAN modules (TouCAN_A, TouCAN_B, TouCAN_C)
Each TouCAN provides the following features:
— 16 message buffers, programmable I/O modes
— Maskable interrupts
— Independent of the transmission medium (external transceiver is assumed)
— Open network architecture, multi-master concept
— High immunity to EMI
— Short latency time for high-priority messages
— Low-power sleep mode, with programmable wake-up on bus activity
— TouCAN_C pins are shared with MIOS14 GPIO or QSMCM
2
Two Enhanced Queued Analog-to-Digital Converter Modules
(QADC64E)
Three CAN 2.0B Controller (TouCAN) Modules
MPC561/MPC563 Reference Manual, Rev. 1.2
Overview
1-7