UPD70F3771GF-GAT-AX Renesas Electronics America, UPD70F3771GF-GAT-AX Datasheet - Page 651

• Manufacturer Part Number: UPD70F3771GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3771GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CAN, CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
(14) Alarm minute setting register (RC1ALM)
(15) Alarm hour setting register (RC1ALH)
The RC1ALM register (8-bit) is used to set minutes of alarm.
This register can be read or written in 8-bit units.
Reset sets this register to 00H.
Caution Set a decimal value of 00 to 59 to this register in BCD code. If a value outside the range is set,
The RC1ALH register (8-bit) is used to set hours of alarm.
This register can be read or written in 8-bit units.
Reset sets this register to 12H.
Cautions 1. Set a decimal value of 00 to 23, 01 to 12, or 21 to 32 to this register in BCD code. If a value
RC1ALM
RC1ALH
the alarm is not detected.
2. Bit 5 of the RC1ALH register indicates a.m. (0) or p.m. (1) if the AMPM bit = 0 (12-hour
After reset: 00H
After reset: 12H
outside the range is set, the alarm is not detected.
system) is selected.
0
0
R/W
R/W
0
Address: FFFFFADAH
Address: FFFFFADBH
CHAPTER 12 REAL-TIME COUNTER
Page 651 of 1509