UPD70F3771GF-GAT-AX Renesas Electronics America, UPD70F3771GF-GAT-AX Datasheet - Page 750

no-image

UPD70F3771GF-GAT-AX

Manufacturer Part Number
UPD70F3771GF-GAT-AX
Description
MCU 32BIT V850ES/JX3-H 128-LQFP
Manufacturer
Renesas Electronics America
Series
V850ES/Jx3-Hr
Datasheet

Specifications of UPD70F3771GF-GAT-AX

Core Processor
RISC
Core Size
32-Bit
Speed
48MHz
Connectivity
CAN, CSI, EBI/EMI, I²C, UART/USART, USB
Peripherals
DMA, LVD, PWM, WDT
Number Of I /o
96
Program Memory Size
256KB (256K x 8)
Program Memory Type
FLASH
Ram Size
40K x 8
Voltage - Supply (vcc/vdd)
2.85 V ~ 3.6 V
Data Converters
A/D 12x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
UPD70F3771GF-GAT-AX
Manufacturer:
Renesas Electronics America
Quantity:
10 000
V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
• Reception error causes
When reception errors occur, perform the following procedures depending upon the kind of error.
• Parity error
• Framing error
• Overrun error
Caution If a receive error interrupt occurs during continuous reception, read the contents of the UCnSTR
If false data is received due to problems such as noise in the reception line, discard the received data and retransmit.
A baud rate error may have occurred between the reception side and transmission side or the start bit may have
been erroneously detected. Since this is a fatal error for the communication format, check the operation stop in the
transmission side, perform initialization processing each other, and then start the communication again.
Since the next reception is completed before reading receive data, 1 frame of data is discarded. If this data was
needed, do a retransmission.
UCnPE
UCnFE
UCnOVE
Error Flag
register must be read before the next reception is completed, then perform error processing.
Parity error
Framing error
Overrun error
Reception Error
CHAPTER 17 ASYNCHRONOUS SERIAL INTERFACE C (UARTC)
Received parity bit does not match the setting
Stop bit not detected
Reception of next data completed before data was read from receive buffer
Cause
Page 750 of 1509

Related parts for UPD70F3771GF-GAT-AX