MPC561MZP56 Freescale, MPC561MZP56 Datasheet - Page 1022

• Manufacturer Part Number: MPC561MZP56
• Manufacturer: Freescale

Specifications of MPC561MZP56

• Cpu Family: MPC56x
• Device Core: PowerPC
• Device Core Size: 32b
• Frequency (max): 56MHz
• Interface Type: QSPI/SCI/SPI/UART
• Total Internal Ram Size: 32KB
• # I/os (max): 56
• Number Of Timers - General Purpose: 22
• Operating Supply Voltage (typ): 2.6/5V
• Operating Supply Voltage (max): 2.7/5.25V
• Operating Supply Voltage (min): 2.5/4.75V
• On-chip Adc: 2(32-chx10-bit)
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 388
• Package Type: BGA
• Program Memory Type: ROMLess
• Program Memory Size: Not Required
• Lead Free Status / RoHS Status: Not Compliant

READI Module
24.9.2.4
The data write synchronization message has the following format:
24.9.2.5
The data read synchronization message has the following format:
24.9.2.6
Refer to
24.9.3
A program/data/ownership trace overrun error or data trace error occurs when a trace message cannot be
queued due to the queue being full, provided data trace is enabled.
The overrun error causes the message queue to be flushed, and an error message to be queued. The error
code within the error message indicates that a program/data/ownership trace overrun error has occurred.
The next DTM will be a synchronization message. Refer to
The error message has the following format:
24.9.4
Data trace is performed by snooping the L-bus for read or write cycles. Data trace functions are enabled
by setting the appropriate fields in the DC register and the DTA registers. For details on field configuration,
24-54
TCODE (13)
TCODE (14)
Section 24.9.2.6, “Relative
[6 bits]
[6 bits]
Queue Overflow Data Trace Error Message
Data Trace Operation
Data Write Synchronization Message
Data Read Synchronization Messaging
Relative Addressing
Figure 24-46. Data Write Synchronization Message Format
Figure 24-47. Data Read Synchronization Message Format
Figure 24-48. Error Message (Queue Overflow) Format
Messages Cancelled
Messages Cancelled
Max Length = 64 bits
Max Length = 64 bits
Min Length = 16 bits
Min Length = 16 bits
MPC561/MPC563 Reference Manual, Rev. 1.2
TCODE (8)
Addressing,” for further details.
[6 bits]
[1 bit]
[1 bit]
Length = 11 bits
Error Code (0b0 0000,
0b0 0001, 0b0 0010,
0b0 0111)
[5 bits]
Full target address
Full target address
Table
[1 to 25 bits]
[1 to 25 bits]
24-20.
[8, 16, or 32 bits]
[8, 16, or 32 bits]
Data Value
Data Value
Freescale Semiconductor