DF2218BR24V Renesas Electronics America, DF2218BR24V Datasheet - Page 627

• Manufacturer Part Number: DF2218BR24V
• Description: IC H8S/2218 MCU FLASH 112-LFBGA
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2218BR24V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 112-LFBGA
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK2218-SS - KIT DEV H8S/2218 WINDOWS SIDESHW3DK2218 - DEV EVAL KIT H8S/2218
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

17.6.2
• Features
Table 17.6 Enumeration Information
USB Standard
Transfer modes
Maximum power
Endpoint configuration
• Notes on USB Boot Mode Execution
⎯ Selection of bus-powered mode or self-powered mode
⎯ Supports the USB operating clock generation by 16 MHz system clock with PLL3
⎯ D+ pull up control connection supported for P36 pin only
⎯ See table 17.6 for enumeration information
⎯ Specify 16 MHz or 24 MHz system clock and the FWE and MD2 to MD0 pins correctly.
⎯ Use the P36 pin for D+ pull-up control connection.
⎯ To ensure stable power supply during flash memory programming/erasing, do not use cable
⎯ Note in particular that, in the worst case, the LSI may be permanently damaged if the USB
⎯ A transition is not made to power-down modes even if the USB bus enters suspend mode
multiplication (FWE = 1, MD2 to MD0 = 011) or 24 MHz system clock with PLL2
multiplication (FWE = 1, MD2 to MD0 = 010)
connection via a bus powered HUB.
cable is detached during flash memory programming/erasing.
when in bus power mode.
USB Boot Mode (HD64F2218U, HD64F2212U, and HD64F2211U)
Ver.1.1
Control (in, out), Bulk (in, out)
Self power mode (UBPM pin = 1)
Bus power mode (UBPM pin = 0)
Configuration 1
Interface Number 0
Alternate Setting 0
EP0 Control (in, out) 64 bytes
EP1 Bulk (in) 64 bytes
EP2 Bulk (out) 64 bytes
Rev.7.00 Dec. 24, 2008 Page 571 of 698
REJ09B0074-0700
100 mA
500 mA