upd78f9211grt2-jjg-a ETC-unknow, upd78f9211grt2-jjg-a Datasheet - Page 123

• Manufacturer Part Number: upd78f9211grt2-jjg-a
• Description: 8-bit Single-chip Microcontrollers
• Manufacturer: ETC-unknow

(1) 8-bit timer H compare register 01 (CMP01)
(2) 8-bit timer H compare register 11 (CMP11)
at which the count value and the compare value before the rewrite match. If the timing at which the count value and
compare value match conflicts with the timing of the writing from the CPU to CMP11, the compare value after the
rewrite takes effect at the timing at which the next count value and the compare value before the rewrite match.
CMP11 can be rewritten during timer count operation.
If the CMP11 value is rewritten during timer operation, the compare value after the rewrite takes effect at the timing
Caution In the PWM output mode, be sure to set CMP11 when starting the timer count operation (TMHE1
This register can be read or written by an 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
Caution CMP01 cannot be rewritten during timer count operation.
This register can be read or written by an 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
= 1) after the timer count operation was stopped (TMHE1 = 0) (be sure to set again even if setting
the same value to CMP11).
Symbol
CMP01
Symbol
CMP11
Address: FF0EH
Address: FF0FH
Figure 7-2. Format of 8-Bit Timer H Compare Register 01 (CMP01)
Figure 7-3. Format of 8-Bit Timer H Compare Register 11 (CMP11)
7
7
After reset: 00H
After reset: 00H
6
6
CHAPTER 7 8-BIT TIMER H1
User’s Manual U16994EJ3V0UD
5
5
R/W
R/W
4
4
3
3
2
2
1
1
0
0
123