upd78f9211grt2-jjg-a ETC-unknow, upd78f9211grt2-jjg-a Datasheet - Page 89

• Manufacturer Part Number: upd78f9211grt2-jjg-a
• Description: 8-bit Single-chip Microcontrollers
• Manufacturer: ETC-unknow

(3) 16-bit timer output control register 00 (TOC00)
Note The one-shot pulse output mode operates correctly only in the free-running mode and the mode in which
Cautions 1. Timer operation must be stopped before setting other than OSPT00.
Address: FF63H
Symbol
TOC00
This register controls the operation of the 16-bit timer/event counter output controller. It sets timer output F/F
set/reset, output inversion enable/disable, 16-bit timer/event counter 00 timer output enable/disable, one-shot
pulse output operation enable/disable, and output trigger of one-shot pulse by software.
TOC00 is set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation sets the value of TOC00 to 00H.
clear & start occurs at the TI000 pin valid edge. In the mode in which clear & start occurs on a match
between TM00 and CR000, one-shot pulse output is not possible because an overflow does not occur.
2. If LVS00 and LVR00 are read, 0 is read.
3. OSPT00 is automatically cleared after data is set, so 0 is read.
4. Do not set OSPT00 to 1 other than in one-shot pulse output mode.
5. A write interval of two cycles or more of the count clock selected by prescaler mode register
00 (PRM00) is required, when OSPT00 is set to 1 successively.
OSPT00
OSPE00
TOC004
TOC001
TOE00
LVS00
Figure 6-7. Format of 16-Bit Timer Output Control Register 00 (TOC00)
7
0
0
1
0
1
0
1
0
0
1
1
0
1
0
1
After reset: 00H
No one-shot pulse output trigger
One-shot pulse output trigger
Successive pulse output mode
One-shot pulse output mode
Disables inversion operation
Enables inversion operation
Disables inversion operation
Enables inversion operation
Disables output (output fixed to level 0)
Enables output
OSPT00
LVR00
<6>
0
1
0
1
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
R/W
No change
Timer output F/F reset (0)
Timer output F/F set (1)
Setting prohibited
OSPE00
<5>
Timer output F/F control using match of CR010 and TM00
Timer output F/F control using match of CR000 and TM00
User’s Manual U16994EJ3V0UD
One-shot pulse output trigger control via software
One-shot pulse output operation control
TOC004
Note
4
Timer output control
Timer output F/F status setting
LVS00
<3>
LVR00
<2>
TOC001
1
TOE00
<0>
89