IPR-PCIE/1 Altera, IPR-PCIE/1 Datasheet - Page 292

• Manufacturer Part Number: IPR-PCIE/1
• Description: IP CORE Renewal Of IP-PCIE/1
• Manufacturer: Altera
• Type: MegaCorer

Specifications of IPR-PCIE/1

• Software Application: IP CORE, Interface And Protocols, PCI
• Supported Families: Arria GX, Cyclone II, HardCopy II, Stratix II
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Rohs Compliant: NA
• Function: PCI Express Compiler, x1 Link Width
• License: Renewal License
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

16–8
Figure 16–3. System Port Connections
Generate the SOPC Builder System
Simulate the SOPC Builder System
PCI Express Compiler User Guide
1
Table 16–6
Follow these steps to generate the SOPC Builder system:
1. On the System Generation tab, turn on Simulation. Create project simulator files
2. After SOPC Builder reports successful system generation, click Save.
You can now simulate the system using any Altera-supported third party simulator,
compile the system in the Quartus II software, and configure an Altera device.
SOPC Builder automatically sets up the simulation environment for the generated
system. SOPC Builder creates the pcie_top_sim subdirectory in your project directory
and generates the required files and models to simulate your PCI Express system.
This section of the design example uses the following components:
■
■
■
You can also use any other supported third-party simulator to simulate your design.
The PCI Express testbench files are located in the
\sopc_pci\pci_express_compiler_examples\sopc\testbench directory.
and click Generate.
The system you created using SOPC Builder
Simulation scripts created by SOPC Builder in the \sopc_pcie\pcie_top_sim
directory
The ModelSim-Altera Edition software
illustrates the required connections.
Chapter 16: SOPC Builder Design Example
December 2010 Altera Corporation
Generate the SOPC Builder System