EP4SGX530HH35C2N Altera, EP4SGX530HH35C2N Datasheet - Page 233

• Manufacturer Part Number: EP4SGX530HH35C2N
• Description: IC STRATIX IV FPGA 530K 1152HBGA
• Manufacturer: Altera
• Series: Stratix® IV GXr

Specifications of EP4SGX530HH35C2N

• Number Of Logic Elements/cells: 531200
• Number Of Labs/clbs: 21248
• Total Ram Bits: 27376
• Number Of I /o: 564
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1152-HBGA
• Family Name: Stratix® IV
• Number Of Logic Blocks/elements: 531200
• # Registers: 424960
• # I/os (max): 560
• Process Technology: 40nm
• Operating Supply Voltage (typ): 900mV
• Logic Cells: 531200
• Ram Bits: 28033024
• Operating Supply Voltage (min): 0.87V
• Operating Supply Voltage (max): 0.93V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1152
• Package Type: FCHBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

Chapter 7: External Memory Interfaces in Stratix IV Devices
Memory Interfaces Pin Support
Figure 7–8. Number of DQS/DQ Groups per Bank in EP4SGX180 and EP4SGX230 Devices in the 1152-Pin FineLine BGA
Package
Notes to
(1) These numbers are preliminary until the devices are available.
(2) EP4SGX180 and EP4SGX230 devices do not support ×32/×36 mode. To interface with a ×36 QDR II+/QDR II SRAM device, refer to
(3) You can also use DQS/DQSn pins in some of the ×4 groups as R
(4) All I/O pin counts include dedicated clock inputs that you can use for data inputs.
(5) You can also use some of the DQS/DQ pins in I/O Bank 1C as configuration pins. You cannot use a ×4 DQS/DQ group with any of its pin members
February 2011 Altera Corporation
×16/×18 DQS/DQ Groups for a ×36 QDR II+/QDR II SRAM Interface” on page
of the ×4 group are used as R
can use the ×16/×18 or ×32/×36 groups that include that ×4 group; however, there are restrictions on using ×8/×9 groups that include that ×4
group.
used for configuration purposes. Ensure that the DQS/DQ groups that you have chosen are not also used for configuration because you may lose
up to four ×4 DQS/DQ groups, depending on your configuration scheme.
Figure
(Note
I/O Bank 1A
I/O Bank 1C
42 User I/Os
7–8:
48 User I/Os
x16/x18=1
x16/x18=1
x8/x9=3
x8/x9=3
DLL1
1), (2), (3), (4),
x4=6
DLL0
x4=7
40 User I/Os
I/O Bank 8A
I/O Bank 3A
40 User I/Os
x16/x18=1
x16/x18=1
x8/x9=3
x8/x9=3
UP
x4=6
x4=6
and R
(5)
DN
pins for OCT calibration. If two pins of a ×4 group are used as R
24 User I/Os
24 User I/Os
I/O Bank 8B
I/O Bank 3B
x16/x18=1
x16/x18=1
x8/x9=2
x8/x9=2
x4=4
x4=4
EP4SGX180 and EP4SGX230 Devices
32 User I/Os
I/O Bank 3C
32 User I/Os
I/O Bank 8C
x16/x18=0
x16/x18=0
x8/x9=1
x8/x9=1
in the 1152-Pin FineLine BGA
x4=3
x4=3
UP
and R
DN
32 User I/Os
32 User I/Os
I/O Bank 4C
I/O Bank 7C
x16//x18=0
x16/x18=0
x8/x9=1
x8/x9=1
pins, but you cannot use a ×4 group for memory interfaces if two pins
x4=3
x4=3
7–26.
24 User I/Os
24 User I/Os
I/O Bank 4B
I/O Bank 7B
x16/x18=1
x16/x18=1
x8/x9=2
x8/x9=2
x4=4
x4=4
I/O Bank 4A
I/O Bank 7A
40 User I/Os
40 User I/Os
x16/x18=1
x16/x18=1
x8/x9=3
x8/x9=3
UP
x4=6
x4=6
Stratix IV Device Handbook Volume 1
and R
DN
pins for OCT calibration, you
I/O Bank 6A
48 User I/Os
I/O Bank 6C
42 User I/Os
x16/x18=1
x6/x18=1
x8/x9=3
x8/x9=3
DLL3
x4=7
x4=6
DLL2
“Combining
7–13