EP4SGX530HH35C2N Altera, EP4SGX530HH35C2N Datasheet - Page 253

• Manufacturer Part Number: EP4SGX530HH35C2N
• Description: IC STRATIX IV FPGA 530K 1152HBGA
• Manufacturer: Altera
• Series: Stratix® IV GXr

Specifications of EP4SGX530HH35C2N

• Number Of Logic Elements/cells: 531200
• Number Of Labs/clbs: 21248
• Total Ram Bits: 27376
• Number Of I /o: 564
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1152-HBGA
• Family Name: Stratix® IV
• Number Of Logic Blocks/elements: 531200
• # Registers: 424960
• # I/os (max): 560
• Process Technology: 40nm
• Operating Supply Voltage (typ): 900mV
• Logic Cells: 531200
• Ram Bits: 28033024
• Operating Supply Voltage (min): 0.87V
• Operating Supply Voltage (max): 0.93V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1152
• Package Type: FCHBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

Chapter 7: External Memory Interfaces in Stratix IV Devices
Stratix IV External Memory Interface Features
Table 7–5. DLL Reference Clock Input for EP4SGX70, EP4SGX110, EP4SGX180, and EP4SGX230 Devices in the 780-Pin
FineLine BGA Package
February 2011 Altera Corporation
DLL0
DLL1
DLL2
DLL3
DLL
1
1
(Top/Bottom)
CLK12P
CLK13P
CLK14P
CLK15P
CLK12P
CLK13P
CLK14P
CLK15P
CLK4P
CLK5P
CLK6P
CLK7P
CLK4P
CLK5P
CLK6P
CLK7P
You can only have one memory interface in each I/O sub-bank (such as I/O
sub-banks 1A, 1B, and 1C) when you use leveling delay chains. This is because there
is only one leveling delay chain per I/O sub-bank.
Table 7–4. DLL Location and Supported I/O Banks
The reference clock for each DLL may come from PLL output clocks or any of the two
dedicated clock input pins located in either side of the DLL.
Table 7–17
device family.
When you have a dedicated PLL that only generates the DLL input reference clock, set
the PLL mode to No Compensation to achieve better performance or the Quartus II
software changes it automatically. Because the PLL does not use any other outputs, it
does not need to compensate for any clock paths.
CLKIN
DLL0
DLL1
DLL2
DLL3
Note to
(1) The DLL can access these I/O banks if they are available for memory interfacing.
DLL
Table
lists the available DLL reference clock input resources for the Stratix IV
7–4:
Bottom-right corner
Bottom-left corner
Top-right corner
Top-left corner
Location
(Left/Right)
CLK0P
CLK1P
CLK2P
CLK3P
CLK0P
CLK1P
CLK2P
CLK3P
CLKIN
—
—
(Top/Bottom)
PLL_B1
PLL_B1
PLL_T1
PLL_T1
1A, 1B, 1C, 2A, 2B, 2C, 7A, 7B, 7C, 8A, 8B, 8C
1A, 1B, 1C, 2A, 2B, 2C, 3A, 3B, 3C, 4A, 4B, 4C
3A, 3B, 3C, 4A, 4B, 4C, 5A, 5B, 5C, 6A, 6B, 6C
5A, 5B, 5C, 6A, 6B, 6C, 7A, 7B, 7C, 8A, 8B, 8C
PLL
Accessible I/O Banks
(Left/Right)
PLL_L2
PLL
—
—
—
Stratix IV Device Handbook Volume 1
Table 7–5
(1)
through
(Corner)
PLL
—
—
—
—
7–33