TMP92CF26AXBG Toshiba, TMP92CF26AXBG Datasheet - Page 375

• Manufacturer Part Number: TMP92CF26AXBG
• Description: Microcontrollers (MCU) TLCS-900/H1 ROMLESS 144KB RAM
• Manufacturer: Toshiba

Specifications of TMP92CF26AXBG

• Processor Series: TLCS-900
• Core: 900/H
• Data Bus Width: 16 bit
• Program Memory Type: ROM
• Program Memory Size: 8 KB
• Data Ram Size: 144 KB
• Interface Type: I2C, I2S, UART, USB
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 10
• Maximum Operating Temperature: + 50 C
• Mounting Style: SMD/SMT
• Package / Case: FBGA-228
• Development Tools By Supplier: BM1040R0A, BM1055R0B, SW96CN0-ZCC, SW00MN0-ZCC
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 6 Channel
• Lead Free Status / Rohs Status: Details

USBCR1
(07F8H)
bit Symbol
Read/Write
Reset State
Function
3.16.2.2 USBCR1 Register
TRNS_USE
•
•
•
•
This register is used to set USB clock enables, transceiver enable etc.
R/W
7
TRNS_USE (Bit7)
WAKEUP
SPEED
USBCLKE
0
Set to “1” for TMP92CF26A.
When
Current_Config<REMOTE WAKEUP>.
If <REMOTE WAKEUP> = “1” (meaning SUSPEND-status), write “1”, and “0” to
<WAKEUP>. This will initiate the remote-wakeup function.
If <REMOTE WAKEUP> = “0” or EP0, 1, 2, 3_STATUS<SUSPEND> = “0”, do
not write “1” to <WAKEUP>.
This bit selects USB speed.
Set to “1” for TMP92CF26A.
This bit controls supply of USB clock.
The USB clock (“f
is started, write “1” to <USBCLKE> after confirming PLL lock up is terminated.
Also, write “0” to <USBCLKE> before stopping the PLL.
0: Disable USB transceiver
1: Enable USB transceiver
0: −
1: Start remote-wakeup function
1: Full speed (12 MHz)
0: Reserved
0: Disable USB clock
1: Enable USB clock
WAKEUP
R/W
the
6
0
(Bit6)
(Bit1)
(Bit0)
remote-wakeup
USB
92CF26A-374
5
”: 48MHz) is generated by an internal PLL. When the USB
4
function
3
is
2
needed,
SPEED
R/W
1
1
TMP92CF26A
first
2007-11-21
USBCLKE
R/W
0
0
check