H8S2110B RENESAS [Renesas Technology Corp], H8S2110B Datasheet - Page 296

• Manufacturer Part Number: H8S2110B
• Description: Renesas 16-Bit Single-Chip Microcomputer Renesas H8S Family/H8S/2100 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Section 12 Serial Communication Interface (SCI)
12.6.4
Figure 12.18 shows an example of SCI operation for reception in clocked synchronous mode. In
serial reception, the SCI operates as described below.
1. The SCI performs internal initialization in synchronization with a synchronization clock input
2. If an overrun error (when reception of the next data is completed while the RDRF flag is still
3. If reception finishes successfully, the RDRF bit in SSR is set to 1, and receive data is
Rev. 2.00 Mar 21, 2006 page 258 of 518
REJ09B0299-0200
Synchronization
clock
Serial data
RDRF
ORER
or output, starts receiving data, and stores the receive data in RSR.
set to 1) occurs, the ORER bit in SSR is set to 1. If the RIE bit in SCR is set to 1 at this time,
an ERI interrupt request is generated. Receive data is not transferred to RDR. The RDRF flag
remains to be set to 1.
transferred to RDR. If the RIE bit in SCR is set to 1 at this time, an RXI interrupt request is
generated. Because the RXI interrupt routine reads the receive data transferred to RDR before
reception of the next receive data has finished, continuous reception can be enabled.
Figure 12.18 Example of SCI Receive Operation in Clocked Synchronous Mode
Serial Data Reception (Clocked Synchronous Mode)
RXI interrupt
request
generated
Bit 7
Bit 0
RDR data read and
RDRF flag cleared
to 0 in RXI interrupt
handling routine
1 frame
Bit 7
Bit 0
RXI interrupt
request generated
Bit 1
ERI interrupt request
generated by overrun
error
Bit 6
Bit 7